Welding and new energy lithium battery pack line equipment and technical service provider

Phone：+86-755-29915506        中文  |  English

Shenzhen Site Technology Co., Ltd.

搜索
Search
News

News

NEWS

News

Check category

Contact us

Phone: +86-755-29915506

Fax: 0755-29915506

Email: selinla_508@qq.com

Head Office: Building 1, Baoshu Technology Industrial Park, Baotian, Xixiang Street, Baoan District, Shenzhen

Contact:
13713891301 (Mr. Zhang)

15220085680 (Manager Zhong)

13410992557 (Manager Chen)
Homepage
/
News

News

What should be paid attention to in the daily maintenance and maintenance of spot welding machine?

What should be paid attention to in the daily maintenance and maintenance of spot welding machine?

Correct operation and maintenance of the spot welding machine can not only extend the service life of the spot welding machine, but also ensure safety during use. Therefore, frequent maintenance and maintenance are very important. Then let Site Technology introduce to you how to do the daily maintenance and maintenance of the spot welding machine.
Time : 2021-12-02
What are the common problems in the welding of precision spot welders?

What are the common problems in the welding of precision spot welders?

Common problems in the welding of precision spot welders: the welding point is not penetrated, and the welding spatters, which makes the spot welder unable to weld. Therefore, in actual use of the spot welding machine, the following items should be paid attention to.
Time : 2021-12-02
The influence of the pressure of the intermediate frequency spot welder on the welding quality

The influence of the pressure of the intermediate frequency spot welder on the welding quality

In the actual intermediate frequency spot welding machine, adjusting the electrode pressure is one of the key parameters of spot welding. The nature of the workpiece adjusts the parameters and pressure. Excessive or too small electrode pressure will reduce the load-bearing capacity and dispersion of the solder joints, especially for tensile loads.
Time : 2021-11-18
Introduction to the workflow of automatic battery spot welding machine

Introduction to the workflow of automatic battery spot welding machine

One is to adjust the effective value of the welding current to make the heat of the internal power source change significantly; second, due to the concentration and contraction of the contact points of the two weldments during the operation of the automatic spot welding machine, concentrated heating occurs there , And the plastic junction area first seems to form unevenly during spot welding plus this unfavorable factor
Time : 2021-11-18
Introduction of equipment performance and advantages of automatic spot welding machine

Introduction of equipment performance and advantages of automatic spot welding machine

ST-1850D cylindrical battery mobile power hand warmer automatic spot welding machine is developed by our company based on the current increasingly fierce competition in the production, processing and sales of cylindrical lithium batteries, and people continue to require cost control, quality improvement and production efficiency. A new type of automatic spot welding equipment produced.
Time : 2021-11-09
Measures to overcome the shift of nugget for intermediate frequency spot welding machine

Measures to overcome the shift of nugget for intermediate frequency spot welding machine

Under normal conditions, when the intermediate frequency spot welding machine is spot welding of different thicknesses and different materials, the nugget will not be offset to the thick plate or the weldment with poor electrical conductivity and thermal conductivity due to the symmetrical bonding surface. As a result, it will be attached The size of the joint surface is lower than the diameter of the nugget, and at the same time, it also makes the penetration rate of thin parts or weldments with good electrical and thermal conductivity lower than the specified value, which reduces the load-bearing capacity of the solder joint.
Time : 2021-11-09
What are the advantages of AC spot welders?

What are the advantages of AC spot welders?

1. It has a stable body structure. 2. The secondary conductive part adopts the upper insulation method, which can well avoid the short-circuit accident of the insulation part when the iron filings are assisted or the lower seat is installed and welded.
Time : 2021-10-21
Daily precautions for the use of spot welders

Daily precautions for the use of spot welders

As we all know, when using spot welding equipment, we must first be familiar with its performance and correct operation methods to ensure our own personal safety. In order to improve work efficiency and product quality, in use, we will come into contact with a lot of things that need to be paid attention to. The following things need to be paid attention to, so let us understand together.
Time : 2021-10-21
Introduction to the safe operation specification of automatic spot welding machine

Introduction to the safe operation specification of automatic spot welding machine

1. Oil stains and dirt must be removed before work, otherwise the service life of the electrode will be seriously reduced and the welding quality will be affected. 2. After the automatic spot welding machine is energized, check the electrical equipment, operating mechanism, cooling system, gas circuit system and the body shell for leakage.
Time : 2021-10-10
Solutions to common problems of pack battery automatic spot welding machine

Solutions to common problems of pack battery automatic spot welding machine

1. There is no display on the LCD screen when booting up. If you encounter this situation, you must first consider whether you can stop powering the pack battery automatic spot welding machine. If the power is ensured, but it still does not display, it may be a power failure. We can reflect on the power line to see if there is a short circuit. Maybe the fuse was burned. If this is the problem, we only need to change the insurance tube of different specifications.
Time : 2021-10-10
Previous page
1
2
…
4

Contact

Tel：+86-755-29915506
Fax：+86-755-29915506
E-mail：selinla_508@qq.com
Add：Building 1, Baoshu science and Technology Industrial Park, Baotian, Xixiang street, Bao'an District, Shenzhen
Contact：0086 13713891301（Mr. Zhang）     0086 15220085680（Manager Zhong）     0086 13410992557（Manager Chen）  

Yangzhou office: No. 330, Guoji lamps trading city, Gaoyou City, Yangzhou City, Jiangsu Province
Contact：0086 18012317032（Manager Chen）

WECHAT

Wechat

WECHAT

Wechat

Shenzhen Site Technology Co., Ltd. 粤ICP备16050825号 Powered by 300.cn