How to properly maintain precision spot welding machine?

precision spot welding machine is a welding tool, which can be used in many industries. The welding machine will produce metal spark splashes during work. This kind of object has a high temperature. If it is not handled carefully, it is likely to encounter flammable materials, which will lead to fire or even explosion. Therefore, the staff should take certain safety measures in the welding process to avoid unnecessary losses, long-term use of spot welding machine will accumulate white medium on the electrode, which will increase the resistance and affect the welding quality. So how should we maintain the instrument?

1, before use

Before using the precision spot welding machine, we should first check whether the equipment can operate normally. If there is no abnormal sound, it means it is normal. Then we should check whether the electrodes of the welding machine are on the same horizontal plane. If the surface of the spot welding machine is oxidized or blackened, we can polish the electrodes with sandpaper.

2, in use

During use, we can observe the condition of the product. If there is fire and blackening, we need to debug the precision spot welding machine to avoid affecting product quality and work efficiency. We also need to check the cooling water and remove scale and blockage in the water pipe in time if blockage is found.

3. After use

, after regular use, we should regularly check the boundary part of the power supply to see if the wiring screws inside the precision spot welding machine work normally. If there is damage or looseness, it needs to be replaced in time. At the same time, the oil mist should be added to ensure that the oil level is within the required range and the dust in the air filter needs to be cleaned in time.

In order to ensure the service life of the precision spot welding machine, we should not only use the correct method for maintenance, but also pay attention to the process of purchasing the instrument. From the process point of view, we can choose by comparing the welding materials. The spot welding machine needs to be heated in a short time and needs to rely on materials with lower resistance. The electrode of the spot welding machine will affect the quality of welding, so it must be kept clean from time, it is also necessary to pay attention to whether the upper and lower electrodes are kept parallel.