For spot welding machine proper operation and maintenance, not only can well extend the service life of welding points, but also to ensure safety during use, therefore, frequent maintenance and maintenance is very important. Then let Site Technology introduce to you how to do the daily maintenance and maintenance of the spot welding machine.

　　1. The spot welding machine should regularly clean the dust to keep the body clean (note that when using an air gun to remove dust, the air pressure should not be too high to avoid blowing off other parts on the circuit board).

　　2. Regularly check the gas channel and water system, there should be no blockage or leakage, and the gas pressure gauge should be checked regularly. The cooling water should be changed frequently in the water course to ensure the cleanliness of the water. This can play a very good cooling effect.

　　3. The electrode tip should be trimmed regularly to ensure that the electrode tip meets the specified size and the electrode is smooth and free of burrs.

　　4. Regularly check whether the plug in the power supply is in good contact, and tighten it in time if it is loose.

　　5. The welding machine regularly checks the grounding condition of the welding machine to ensure the personal safety of the operator.