1. Project Name: Automatic Nickel Feeding Wire Bonder

2. Model: ST-D500 (Attached Figure)

3. Performance Introduction

1. The whole machine is controlled by Mitsubishi PLC, touch screen man-machine interface, and parameters are displayed in Chinese.

2. The nickel chip stepping motor automatically feeds, the length can be set arbitrarily, and a pre-feeding mechanism is added to prevent the deviation of the feeding length.

3. Pneumatic cutting, independent tool design, quick tool replacement, round knife, straight knife can be selected.

4. Nickel sheet guide trough independent design, extraction structure, convenient to replace different specifications of nickel sheet.

5. Standard inverter DC welding power supply, fast speed, stable welding performance.

6. The welding mode can be selected as feeding before welding or welding before feeding.

7. Innovative feeding mechanism, spot welding position can realize forward welding, reverse welding, vertical welding and intermediate welding.

4. technical parameters

, control power supply: AC 220V 50HZ;

2, welding machine power supply: three-phase 380V 50HZ;

3, gas source: 0.4Mpa;

4, feeding speed: 1000 mm/S(max);

5, weldable length: 8-100mm;

, welding speed: 2000-3200 pieces per hour;

, equipment weight: 60KG;

, operation interface: man-machine interface.

5. is suitable for process

, nickel sheet width: 2-7mm;

2, nickel sheet thickness: 0.08-0.2mm;

3, wire type: 18-30 multi-strand copper wire.

6. power parameters:

5. Table Parameters

1. Equipment pressure: 0.2~0.7Mpa;

2. Equipment weight: 60 KG;

3. Exterior dimensions: 900mm (length) * 800mm (width) * 1500mm (height).

7. equipment proofing legend