1. Project Name: Ten-gear Battery Cell Automatic Sorter

2. Model: ST-FX10 (Attached Figure)

3. Equipment Requirements

Equipment and Accessories shall be brand new, stable in operation and convenient in operation, and shall be fully responsible for its product quality, performance index and safety performance. The equipment shall reach the domestic advanced level and conform to relevant national energy-saving standards and regulations, and meet the demand-side battery sorting test requirements. Scope of Application of

4. Equipment

This equipment is mainly used for sorting and testing the voltage and internal resistance of 18650 cylindrical batteries.

This equipment can be changed in five minutes (changing different molds) for some cylindrical cells (such as 18650,21700,26650,32650, etc.).

5. equipment composition

The equipment provided by the supplier consists of electrical, mechanical and chassis components. The main components are divided into feeding structure, test structure, sorting structure and so on.

6. Equipment Comprehensive Performance

6.1 Basic Parameters:

6.1.1 Equipment Efficiency: 60 ~ 70PPM;

6.1.2 Equipment Marrying Rate: ≥ 95%;

6.1.3 Number of sorting channels: 11;

6.1.4 Internal resistance detection accuracy of instrument: +/-0.5 rdg, display resolution 0.01 milliohms;

6.1.5 Instrument Voltage Detection Accuracy: +/-0.05 rdg, Display Resolution: 0.1 mV;

6.1.6 Internal resistance detection repetition error:<1 milliohm (AC internal resistance detection method)

6.1.7 Voltage detection repetition error:<1 mV;

6.1.8 Equipment Appearance Reference Size: L * W * H = 1400*700*1600mm;

6.1.9 Compressed Air Source: ≥ 0.6Mpa (Provided by Buyer)

6.1.10 Input Power Supply: AC220V/50HZ 1KW (Provided by Buyer)

6.2 Equipment Main Components

6.2.1 Detector: Hepu HK3561 High Precision Built-in Tester

6.2.2 Linear Guide: HIWIN/TBI

6.2.3 PLC: Embedded Motion Control System

6.2.4 Solenoid Valve: yadke/Xingchen

6.2.5 Cylinder Class: Yadke/Xingchen

6.3 Equipment General Configuration and Standard

6.3.1 Equipment Appearance Color: Standard Color Warm Grey 1C.

6.3.2 Equipment noise: ≤ 65db.

6.3.3 The equipment meets the national safety standards for mechanical and electrical equipment, and there are no obvious or potential design safety hazards.