Equipment Introduction

is suitable for electric vehicle battery pack, street lamp battery pack, car battery module, balance car battery pack, scooter battery pack, mobile power supply, start battery pack module, Power tool battery pack, notebook battery pack, etc. , various electronic products, etc. various battery combinations!

Features

1. Support breakpoint start, support automatic start and manual start mode conversion.

2. Programming is simple, supports any point-to-point programming and array programming , can realize spot welding, single point, double point, three point mode fast switching, spot welding path optimization, improve efficiency, local disk can store programming file 99 group , USB interface can be graphic import .

3. spot welding power supply has a virtual welding alarm function , which can directly communicate with the motion controller, which can record the position of virtual welding , and welding needle replacement forecast reminder.

4. Comes with welding current monitoring system, which can monitor welding current in real time.

5. The welding efficiency is about 45 times that of labor 4#, with high stability, labor saving and time cost saving .

Technical parameters

Y-axis stroke	4 0 0mm (customizable)
X-axis stroke	500 mm (customizable)
Maximum spot welding rate	5S/point; 1500-1800PCS/hour
motor transmission maximum speed	1000 mm/S
maximum load cell ( 18650)	about 500pcs(20*25)
storable number of file groups	99 group
operating system	embedded system + man-machine picture
transmission mode	screw + precision linear guide
Drive Mode	Hybrid Servo Motor
Cooling Mode	Water Cooling /Air Cooling (Optional)
Welding Nickel Strip Thickness	0.1 mm-0. 3 mm, above 0.2mm, convex points
are required. Exterior dimensions	900L * 1000 W * 16 00H
Repeated positioning accuracy	±0.02mm
level bearing weight	15KG (according to customer requirements)

complete machine parameters

1. equipment power supply:

single phase ~AC V 10% 50/60Hz ;

2. Equipment weight:

180 KG;

3. Exterior dimensions:

90 0mm (length) * 10 00mm (width) * 1 6 00mm (height) ;

4. Operating environment:

4.1 Please avoid using this equipment in places with high temperature, high humidity, vibration or impact, metal powder and welding spatter, pay attention to the control of the ambient temperature around the equipment;

4.2 equipment must be grounded and separated from the personnel grounding wire.

5.

equipment service life : more than 5 years.

6. welding power supply technical parameters:

Model	IST-5000
Input Power (V)	AC220V ± 10% 50/60Hz
Output Current (A)	5000A	No-load Voltage (V)	10.8
Control Mode	Fixed Current Control	Cooling Mode	Force Air Cooling
Welding Conditions	8	Weight (Kg)	30.3
Overall Dimension (W×H×D)	270 × 330 × 465
Transformer Size (W×H×D)	180 × 270 × 330
with	0.15-0. 30 Nickel Sheet Welding

Application Case