Functional Features
Intermediate Frequency Inverter DC Resistance Welding Control Power Supply is composed of single-phase or three-phase alternating current through rectified power
to pulsating direct current, which is converted into intermediate frequency side
wave input transformer through inverter circuit composed of power switching devices, and rectified into direct current with less pulsation after step-down to supply electrode for
welding of workpiece. Inverters usually use current feedback pulse width modulation to obtain stable constant current output.
intermediate frequency inverter spot welding machine has superior performance and is suitable for welding
of high thermal conductivity thin metal parts and fine workpieces.
IST inverter DC spot welding machine features
1. Induction load voltage, feedback control constant current, to achieve high quality welding.
2.PRE HEAT and MAIN HEAT are energized by preheating before welding to ensure stable welding quality of
.
3. Maintain the continuity of energy density, short welding time, and reduce the deformation and discoloration of the base material.
(welding time controlled in microsecond units, continuous output mode).
4. Easy to change from low current to high current, suitable for precision welding.
5. The upper and lower limits of the current can be set to simply judge whether the welding quality is good or not, and
is suitable for welding automation instruments.
6. The welding current rises with the power-on time to ensure the welding result.
Gantry inverter DC spot welding machine performance characteristics
1. Using high current inverter DC spot welding power supply, welding performance is stable.
2. Using split design, the height and position of the welding head are adjustable.
ST Technology strives for excellence
3. Gantry structure, suitable for electric vehicle battery packs, car battery modules, balance car battery
pool packs, scooter battery packs, mobile power supplies, start battery pack modules, power tool battery pack,
notebook battery pack, etc.
Power Parameters:
Model :
IST-5000
Input Power (V) :
3Phase AC 380V 10% 50/60Hz
Output Current (A) :
5000
No-load Voltage (V) :
10.8
Control Mode:
constant current control
cooling method:
forced air cooling
welding condition:
application:
electronic parts, electronic wires,
battery connecting pieces, small hardware,
sensors, etc.
weight (Kg) :
30.3
external dimensions (W×H×D) :
270 × 330 × 465
Transformer Exterior Dimensions
(W×H×D) :
180 × 270 × 330
Workbench Parameters
. Welding Head Height Adjustment Range: 50-150mm;
2. Battery pack moving platform range:(
X direction: 250mm Y direction: 500mm);
3. Equipment air pressure: 0.2~0.7Mpa;
4. Equipment weight: 40 KG;
5. Exterior dimensions: 920mm (length) * 600mm (width) * 1300mm (height).
Application Case
Battery Pack Welding Legend
